Y. Jodai's Labo

[Change to Japanese]


Yoshifumi Jodai, Dr. Eng.

Associate Professor

Department of Mechanical Engineering
National Institute of Technology, Kagawa College
355 Chokushi-cho, Takamatsu City, Kagawa 761-8058 Japan


http://www.kagawa-nct.ac.jp/faculty/jodai/jodai-e.html


Profile

Experience:

Field of Study:

Member:

Teaching:

Textbooks on Fluids Engineering:

Academic Paper:

  1. Y. Jodai et al .,
    "Characteristics of Double Pulse Discharge in Excimer Laser with Gas Flow"
    Journal of the Japan Society for Aeronautical and Space Sciences, 48-560 (2000),
    pp. 284-291 (in Japanese, Judged Full Paper).

  2. Y. Jodai et al .,
    "Visualization of Double-Pulse Discharge in Excimer Laser with Gas Flow"
    Japanese Journal of Applied Physics, c1-2B (2001),
    pp. 1140-1143 (in English, Judged Full Paper).

  3. H. Takabatake et al .,
    "An Educational Attempt on Computational Mechanics and
    Practical Applications of General-Purpose FEM Program",
    Japanese College of Technology Education Journal, 25 (2002),
    pp. 151-156 (in Japanese, Judged Full Paper).

  4. H. Kamada et al .,
    "Questionaries to the Students of Takamatsu College of Technology"
    Research Report of Takamatsu College of Technology, 41 (2006),
    pp. 45-69 (in Japanese, Unrefereed Paper).

  5. Y. Jodai et al .,
    "The Effects of Splitter Plates on Turbulent Boundary Layer
    Developing on a Flat Plate near the Trailing Edge"
    Transactions of the Japan Society of Mechanical Engineers, Series B, 72-719(2006),
    pp. 1735-1742 (in Japanese, Judged Full Paper).

  6. Y. Jodai et al .,
    "The Effects of Splitter Plates on the Separated Flow Region
    behind a Long Flat Plate with a Blunt Trailing Edge"
    Research Report of Takamatsu College of Technology, 42 (2007),
    pp. 7-13 (in Japanese, Unrefereed Paper).

  7. Y. Jodai et al .,
    "The Effects of Splitter Plates on the Turbulent Wake
    developing behind a Flat Plate with a Thick Trailing Edge"
    Research Report of Takamatsu College of Technology, 42 (2007),
    pp. 15-21 (in Japanese, Unrefereed Paper).

  8. Y. Jodai et al .,
    "The Effects of Splitter Plates on the Vortex Structure
    behind a Long Flat Plate with a Blunt Trailing Edge"
    Transactions of the Japan Society of Mechanical Engineers, Series B,73-729(2007),
    pp. 1183-1190 (in Japanese, Judged Full Paper).
  9. * Cited by "Yearbook of Mechanical Engineering", Journal of the Japan Society of Mechanical Engineers,111-1077(2008-8), p. 663.

  10. Y. Jodai et al .,
    "The Effects of Splitter Plates on Turbulent Boundary Layer
    on a Long Flat Plate near the Trailing Edge,"
    Transactions of the ASME-Journal of Fluids Engineering,
    130-5(2008), 051103 (7 pages), (in English, Judged Full Paper).
  11. * Beginning in 2008 all ASME Journals will transition from traditional page numbers to six-digit citation identifiers (CIDs).

  12. Y. Jodai et al .,
    "Effects of Splitter Plates on Turbulent Quantities on a Boundary
    Layer Developing on a Flat Plate near the Trailing Edge"
    Journal of Fluid Science and Technology, 6-4(2011),
    pp. 587-597 (in English, Judged Full Paper).

  13. Y. Jodai et al .,
    "Effects of Splitter Plates on Turbulent Quantities on a Boundary
    Layer Developing on a Flat Plate near the Trailing Edge"
    Transactions of the Japan Society of Mechanical Engineers, Series B, 77-783(2011),
    pp. 2133-2142 (in Japanese, Judged Full Paper).

  14. K. Nakamura et al .,
    "Advanced Program for Strategic Engineering Promotion with Technical College Collaboration
    : Its Concept and Initial Stage"
    Transactions on GIGAKU, 1(2012),
    pp. 01003/1-01003/9 (in English, Judged Full Paper).

  15. Y. Jodai and G. E. Elsinga,
    "Experimental observation of hairpin auto-generation events in a turbulent boundary layer"
    Journal of Fluid Mechanics (© Cambridge University Press), 795(2016), pp. 611-633,
    published online on 19 April, printed on 25 May (in British English, Judged Full Paper). [Link to abstract]



International Conference:

  1. K. Yatsui et al .,
    "Generation and Propagation of Shocks in Discharge-Pumped Excimer Laser,"
    Proceedings of the 10th Int'l. Symp. on Gas Flow & Chemical Lasers,
    SPIE Vol.2502, 1995,pp.134 -139.

  2. Y. Jodai et al .,
    "OBSERVATION OF DOUBLE PULSE DISCHARGE FOR EXCIMER LASER EXCITATION
    WITH GAS FLOW ,"13th International Conference on High-Power Particle Beams,
    June 25-30, 2000.

  3. K. Kubo et al .,
    "CREATIVE MANUFACTURING PROGRAM FOR MECHANICAL ENGINEERING EDUCATION,"
    11th Asian Symposium on Ecotechnology, December 4-5, 2004.
    Journal of ecotechnology research,Vol.10-4(2004), pp.278-279.

  4. Y. Jodai et al .,
    "The Effects of Splitter Plates on Turbulent Boundary Layer on a Long Flat
    Plate near the Trailing Edge,"
    5th Joint ASME/JSME Fluids Engineering Conference,
    (3rd Symposium on Fundamental Issues and Perspectives in Fluid Mechanics).
    Held on July 30-August 2, 2007(San Diego, CA USA).

  5. Y. Jodai et al .,
    "Influence of the Wake Splitter Plate on the Vortex Structure
    behind a Long Flat Plate with a Blunt Trailing Edge,"
    The 2nd International Conference on Jets, Wakes and Separated Flows,
    (ICJWSF-2008).
    Held on September 16 - 19, 2008 (Berlin, Germany).

  6. Y. Jodai,
    "Influence of the Wake Splitter Plate on Turbulent Boundary Layer
    on a Long Flat Plate with a Blunt Trailing Edge,"
    Proceedings of the 1st Innovative Technology towards Sustainable Society,
    (ITSS2010), pp. 31 - 36.
    Held on July 3 - 4, 2010 (Kagawa, Japan).

  7. Y. Jodai et al .,
    "The Effects of Splitter Plates on a Turbulent Boundary Layer
    Developing on a Flat Plate near the Trailing Edge (Turbulent Flow Measurements),"
    The 3rd International Conference on Jets, Wakes and Separated Flows,
    (ICJWSF-2010).
    Held on September 27 - 30, 2010 (Cicinnati, Ohio USA).

  8. Y. Jodai,
    "'Introduction to Engineering Frontier' as a Collaborative Subject for Advanced Course
    in Nagaoka University of Technology, at Kagawa National College of Technology (Invited) ,"
    Proceedings of the 1st International GIGAKU Conference in Nagaoka,
    (IGCN), p. 85.
    Held on February 3 - 5, 2012 (Niigata, Japan).

  9. Y. Jodai,
    "Influence of Planar and Corrugated Sheet on Turbulent Wake
    behind Flat Plate with Thick Trailing Edge,"
    18th Australasian Fluid Mechanics Conference,
    (AFMC).
    Held on December 3 - 7, 2012 (Launceston, Australia).

  10. N. Aoyagi et al .,
    "Learning From a Research of Overseas Industries,"
    Proceedings of the 2nd International GIGAKU Conference in Nagaoka, (2nd IGCN), p. 65,
    June 21-23, 2013 (Nagaoka, Japan).

  11. T. Yamaguchi et al .,
    "Activities of Collaborating courses in "Advanced Program for Strategic Engineer Promotion
    with Technical College Collaboration" that Technical Colleges and Nagaoka University of
    Technology and a Collaborating Subject "Local industry and Globalization","
    Proceedings of the 2nd International GIGAKU Conference in Nagaoka, (2nd IGCN), p. 68,
    June 21-23, 2013 (Nagaoka, Japan).

  12. Y. Jodai, J. Westerweel, G.E. Elsinga,
    "Time-resolved Tomographic-PIV measurement in the near-wall region of a turbulent boundary layer,"
    Proceedings of the 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics,
    12 pages (p. 3.11.1 in book of abstracts), July 7-10, 2014 (Lisbon, Portugal).

  13. G.E. Elsinga and Y. Jodai,
    "Resolved measurements of the near-wall coherent structures,"
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY 67th Annual Meeting of the APS
    Division of Fluid Dynamics, p. 138, November 23-25, 2014 (San Francisco, CA).

  14. Y. Jodai,
    "Cross-cultural understanding and global human resources and Advanced Engineering and Global Leadership Education (Invited),"
    Booklet of the 9th International Symposium on Advances in Technology Education, (ISATE2015), p. 37,
    September 16-18, 2015 (Nagaoka, Japan).

  15. Y. Jodai and S. Urushihara,
    "Active Wake Control over a Long Flat Plate with DBD Plasma Actuator,"
    Abstract book of the World Engineering Conference and Convention, (WECC2015), p. 170,
    November 29-December 2, 2015 (Kyoto, Japan).

  16. M. V. Goudar, W.-P. Breugem, Y. Jodai and G.E. Elsinga,
    "Auto-generation by interacion of weak eddies,"
    Book of Papers on the 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016)
    pp. 1508-1509, August 21-26, 2016 (Montreal, Canada).

Research:

My Favorite:



Last Modified: April 3, 2017.


[ Return to the Japanese Home Page]