Y. Takahashi

Yoichi Takahashi, Dr. Eng.

Associate professor

Department of Mechanical Engineering
National Institute of Technology, Kagawa College， Takamatsu Campus
355 Chokushi-cho, Takamatsu City, Kagawa 761-8058 Japan

Phone: +81-87-869-3881(Dial-in)
FAX: +81-87-869-3879(Department office of Mech.Eng.)

ytaka(@t.kagawa-nct.ac.jp)
http://kagawa-nct.ac.jp/

Profile

Department of Mechanical Engineering, Takamatsu National College of Technology, March, 2002.

BS/ Department of Production Systems Engineering, Toyohashi University of Technology, March, 2004.

MA/ Department of Production Systems Engineering, Toyohashi University of Technology, March, 2006.

Research Associate/ Department of Mechanical Engineering, Takamatsu National College of Technology, April, 2006.

Assistant Professor/ Department of Mechanical Engineering, Takamatsu National College of Technology, April, 2007.

Assistant Professor/ Department of Mechanical Engineering, National Institute of Technology, Kagawa College, October, 2009.

Dr/ Mechanical Engineering, Intelligent Structures and Mechanics Systems Engineering, Graduate School of Advanced
　　　 Techonology and Science, Tokushima University, March, 2011.

Senior lecturer/ Department of Mechanical Engineering, Kagawa National College of Technology, April, 2013.

Associate professor/ Department of Mechanical Engineering, National Institute of Technology, Kagawa College, April, 2018.

Field of Study

Rotary forming (spinning)

Precision machining (Grinding, Polishing)

Paper and Proceedings

T. Shibata, Y. Takahashi, O. Horiuchi, T. Masuzawa, T. Mineta and E. Makino, Development of Microimprint Technology with Electroformed Nickel Mold, Proc. 6th International Conference and 8th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology (euspen 2006), Volume II, 168-171 (2006).

T. Shibata, Y. Takahashi, T. Kawashima, T. Kubota, T. Mineta and E. Makino, Micromachining of Electroformed Nickel Mold using Thick Photoresist Microstructure for Imprint Technology, Proc. 7th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST 2007),183-184 (2007).

T. Shibata, Y. Takahashi, T. Kawashima, T. Kubota, T. Mineta and E. Makino, Micromachining of Electroformed Nickel Mold using Thick Photoresist Microstructure for Imprint Technology, Microsystem Technologies, Vol.14, Num.9-11, (2008), Page 1359-1365.

Y. Takahashi, Shigefumi Kihara, Takuo Nagamachi, Yoshiaki Takada, Effect of Taper Angle on Occurrence of Cracking in Spinning of Pipe, Steel Research International, Vol. 81, Issue 9, (2010-9), Page 986-989.

Y. Takahashi, Yusuke Iritani, Shigefumi Kihara, Takuo Nagamachi, Yoshiaki Takada, Evaluation of Cracking in Spinning of Pipe End, Proceedings of the International Symposium on Innovative Technology towards Sustainable Society (ITSS 2010), 60-63(2010).

Y. Takahashi, Shigefumi Kihara, Takuo Nagamachi, Hiroaki Mizumoto, Yuya Nakata, Effects of Forming Conditions on Wrinkling in Necking of Tube End, Materials Transactions, Vol. 52, No.1(2011), Page 31-36.

Y. Takahashi,Shigefumi Kihara, Ken Yamaji and Mitsunobu Shiraishi,Effects of Die Dimensions for Curvature Extrusion of Curved Rectangular Bars，Materials Transactions, Vol. 56, No. 6 (2015), Page.844-849.

Y. Takahashi,Shigefumi Kihara, Takuo Nagamachi, Kozi Higaki,Effects of neck length on occurrence of cracking in tube spinning，Procedia Manufacturing, Vol.15 (2018), Page.1200-1206.

Teaching

Working Technology
Manufacturing Exercise I, II, III
Mechanical Experiment I

Last Updated: 2018/4/1

[Return to the Mechanical Engineering Home Page]